Web Analytics

Sensidyne Gilian 10i Air Sampling Pump

Sensidyne Gilian 10i Air Sampling Pump

Personal air sampling pump with flow rates between 4 LPM and 10 LPM. Its four-stage program with repeat cycling and programmable delayed start lets you use the 10i for scheduled sampling or intermittent duty cycles.

Special flow control circuitry automatically compensates for changes in flow rate, back pressure, and temperature. The display shows real-time flow, total sample time, total volume sampled, and battery charge. This intrinsically safe pump is powered by NiMH batteries that charge to full capacity in just four hours.

  • Flow range from 4 to 10 LPM
  • Constant flow control ±5% of set flow at 4 to 10 LPM
  • Four-stage program with repeat cycle and programmable delayed start
  • Displays real-time flow, total sample time, and total volume sampled
  • Intuitive, simple four-key operation with no confusing symbols or codes
  • Safe, environmentally friendly NiMH batteries with four-hour recharge
  • Intrinsically safe with certifications in North America and Europe
  • Pump kit includes pump, tubing, charger, and user manual. Multi-unit kit also includes a carrying case.

Higher Flow Applications

The high flow capability of the Gilian 10i enables sampling capability for applications with flow rates between 4LPM and 10 LPM.

NiMH Memory-Free Battery

NiMH battery with quick-charge time in under 4 hours.

Eliminates shipping and disposal issues.

Programmable Functionality

Four stage program with repeat cycling

Allows scheduled sampling or intermittent duty cycles

Programmable delayed start

Intuitive Operation with Lock-out Feature

Simple four-button design makes pump easier to understand and operate.

Live Flow Display Large display continuously shows real-time flow, total sample time and total volume sampled.

Special flow control circuitry automatically compensates for changes in flow rate, back-pressure and temperature.

Intrinsically Safe Certified

Intrinsically Safe for use in explosive environments.

User Manual
Data Sheet
Quick Start Guide

PERFORMANCE
Flow Range 4.00 – 10.00 LPM
Constant Flow Control ± 5% of set flow at 4-10 LPM
Flow Compensation Up to 5-hours at:
5 LPM up to 40” H2O back pressure
6 LPM up to 34” H2O back pressure
7LPM up to 28” H2O back pressure
8LPM up to 22” H2O back pressure
9LPM up to 18” H2O back pressure
10LPM up to 12” H2O back pressure
Run Time 8-hours minimum at:
5 LPM up to 25” H2O back pressure
6 LPM up to 22” H2O back pressure
7LPM up to 20” H2O back pressure
8LPM up to 18” H2O back pressure
9LPM up to 12” H2O back pressure
10LPM up to 8” H2O back pressure
Flow Fault If flow changes exceed 5% within back pressure specifications, fault icon appears. If fault exceeds 30 seconds, pump shuts down. Pump attempts to restart every 3 minutes for up to 30 min.
ENVIRONMENTAL
Temperature Ranges
   Operating 32°F to 113°F (0°C to 45°C)
   Storage -4°F to 113°F (-20°C to 45°C)
   Charging 41°F to 104°F (5°C to 40°C)
Humidity Ranges
   Operating 5-85 %RH, non-condensing
   Storage 5-98 %RH, non-condensing
GENERAL
Display Flow Rate, Total Sample Time,
Total Volume Sampled
Controls POWER/ENTER, SET/CAL,
BACK/CLEAR, START/RUN/STOP
Indicators Green LED (“Normal Operation”)
Icons (LCD) Battery Indicator, Hold, Fault, Set, Prog
Dimensions 3.2W x 5.4H x 2.3D inches
8.2W x 13.7H x 5.8D cm
Weight 23 oz. (654 g)
ELECTRICAL
Battery Pack Removable, Rechargeable
Nickel-Metal-Hydride
Battery Level Indicator Icon displays Full, Mid, & Low levels
Interface Connectors Charging Jack
Charging Time Under 4 hours
APPROVALS
EN 1232 Type G
Intrinsic Safety
US/Canada NRTL (FM)
Class I, Div 1 Groups A, B, C, D;
Class II, Div 1, Groups E, F & G;
Class III, T4
ATEX
 II 1 G
Ex ia IIC T4
CE
Applicable Directives
ATEX 94/9/EC; EMC 2004/108/EC (RFI)
LVD 2006/95/EC